12" x 12" Fabric Carrier Sheet Cutting Mat For The Graphtec Silhouette Cameo Artistix

Artistix Carrier sheets for the Silhouette Cameo

Fabric & material cutting mat

Sheet size 12 x 12

This innovative & dedicated fabric mat is a unique solution specially designed to secure and cut fabrics with easy release of the material

The Artistix fabric mat is purpose made for cutting fabric (as well as hundreds of other materials)

These fabric cutting mats combine an increased strength adhesive with a durable backer to provide beautiful cuts with a wide variety of fabrics

The tack is also extremely forgiving for delicate materials allowing for easy removal from the adhesive surface

Flexible durable clear backer to protect your machine and extend the life of your blade

Multipack option allows you to have one project cutting while working on another

Recommended media

Fabric

Material

Felt

Tips and tricks

Place your fabric right-side down on the fabric mat. Patterns are designed to be cut right-side down. It also makes it easier to see washable pen marks on darker fabrics or more complex patterns

If your mat has a few threads, don’t worry about it. Place your next piece of fabric right on top and the blade will cut through it

When your mat is new, just use your fingers to lightly press the fabric onto your mat

When your mat is worn in, use more pressure, or use a brayer to help your fabric stick to your mat

Be patient when pulling your pieces off the mat and they’ll be less like to stretch.

Keep your hands off. The oils in your fingers quickly contaminate the adhesive on the mat, causing it to lose its stick. Try to avoid touching the adhesive if possible. You can use a brayer to help adhere your fabric to your mat if that helps (don’t press hard, just enough to adhere the fabric to the mat). Use tweezers to pick up your pieces off the mat so that you keep your fingers away from the adhesive

Don’t use a scraper! The adhesive on the fabric mat is different to the pro mats and you can scrape the adhesive right off the mat.

If the threads are really building up you or are noticing they are affecting your cuts, then you can use a piece of light tack masking tape to pull up the loose threads. Test the masking tape on a small area first. If the tape is too strong it can pull the adhesive away. Also it needs to be lightly dabbed, just enough pressure to remove threads and other debris.

Care and attention

After each use, remove all material from your mat and replace the dust cover to keep the mat surface free of dust

Baby wipes contain moisturiser which can weaken the adhesive

Alcohol wipes can neutralise the adhesive

To refresh the mat use really light tack masking tape/lint roller to remove dust & fibres but only when the mat start to lose its strength & not between every cut. Test the masking tape on a small area first. If the tape is too strong it can pull the adhesive away. Also it needs to be lightly dabbed, just enough pressure to remove dust & fibres

Don't use solvents anywhere on the sheet ever.

When the tack is completely flat the mat can be washed with hot water to and left to dry

Laying the sheet dust sheet down under a heavy book when not in use also helps re-constitute the adhesive and stops the sheet from warping.

Please take care of the sheet and markings as the machine will not recognise the mat if it is warped or the registration marks are damaged